CCD Visual Position Laser Marking Machine
Gabatarwar Samfur
Dangane da na'urar yin alama ta gargajiya, ana amfani da kyamarar CCD mai girman pixel don gano matsayin samfurin a halin yanzu, kuma bayanan matsayi na ɗaya ko fiye da samfuran da aka tattara a ainihin lokacin ana aika su zuwa katin sarrafa alama ta hanyar kwamfutar don ganowa. cimma daidaitaccen alama.
Tsarin sakawa na gani da alama yana fahimtar matsayi mai sauri, alamar samfura da yawa a lokaci ɗaya, kuma yana iya aiwatar da ciyarwar layin taro ta atomatik, sannan aiwatar da sakawa na gani da alama bayan matsayi, ceton aiki, haɓaka ingantaccen aiki, da sauƙin gane samarwa ta atomatik. mai jituwa tare da samfurori da yawa Layin taro yana adana kuɗi mai yawa don aiki.
Idan aka kwatanta da na'ura mai alamar laser na gargajiya, tazarar alamar yana da sauri, yana adana sau 3-5 lokacin sarrafa samfurin, kuma daidaiton matsayi ya fi girma.Tare da tsarin sakawa na musamman, injin alamar Laser CCD yana dacewa da kasuwa mai kyau mai kyau, kayan aikin hannu, sassan lantarki na IC, allon kewayawa na PPC da sauran kayan aikin polymer.
CCD na gani sakawa Laser alama inji shi ne don kafa misali samfur na samfurin a da
sarrafa ta hanyar tsarin sakawa na gani, sannan a sarrafa batch, tsarin zai ɗauki hotunan samfurin ta atomatik.Yana iya ciyarwa yadda yake so, cimma madaidaicin matsayi da cikakkiyar alamar alama, wanda ke haɓaka haɓakar alamar sosai.
Aikace-aikace
CCD hangen nesa saka Laser alama inji goyon bayan fiber Laser UV Laser CO2 Laser.Bisa ga kayan zabi nau'in laser mai dacewa.Ya dace da babban nauyin aiki, matsayi na samfurin yana da wuyar gaske, bambancin aiki da rikitarwa.
Ma'auni
| Samfura | Saukewa: F200TCVP | Saukewa: F300TCVP | Saukewa: F500TCVP |
| Ƙarfin Laser | 20W | 30W | 50W |
| Tsayin Laser | 1064 nm | ||
| Single Pulse Energy | 0.67mj ku | 0.75mj ku | 1mj ku |
| M2 | <1.5 | <1.6 | <1.8 |
| Daidaita Mita | 30 ~ 60 kHz | 30 ~ 60 kHz | 50 ~ 100 kHz |
| Yawan Aiki | A cikin yankin kama babu iyaka. | ||
| Saurin Alama | ≤7000mm/s | ||
| Software | BEC Laser- CCD na gani posioning software | ||
| Filin Kallo | Standard: 80mm × 80mm (Na musamman) | ||
| Daidaito | ± 0.1mm | ||
| Mai ɗaukar Belt | Daidaitacce saurin (Na musamman) | ||
| Tsarin sanyaya | Sanyaya iska | ||
| Bukatar Wutar Lantarki | 220V± 10% (110V± 10%) / 50HZ 60HZ jituwa | ||
| Girman Shiryawa & Nauyi | Machine: A kusa da 80*108*118cm, Babban nauyi a kusa da 150KG | ||
Siffofin
1. Yarda da tsarin sakawa na gani mai mahimmanci, daidaitaccen matsayi da sauri daidai da sauri.
2. Tsarin sakawa na gani na CCD yana goyan bayan laser na yau da kullun irin su ultraviolet, fiber na gani, CO2, da dai sauransu, kuma ya dace da samfuran alama tare da kayan aiki iri-iri.
3. Duk wani matsayi, kowane kusurwa, da kowane adadin samfurori, tsarin sakawa na gani ta atomatik ya gane, ganowa da gano wuri, kuma ta atomatik alama.
4. Ƙaddamar da daidaitaccen bel mai ɗaukar hoto na aiki tare yana goyan bayan yanayin mataki da yanayin shigar da wutar lantarki, wanda za'a iya canzawa kamar yadda ake buƙata.
5. KKVS4.0 tsarin sakawa na gani na software, bayan shekaru na ingantawa da tabbatarwa, ƙirar ta fi abokantaka da sauƙin aiki.
6. Za'a iya daidaita bel ɗin jigilar kaya bisa ga girman samfurin da halayen samfurin.
Misali
